Info

(Standard Equipped Motorcycle) 1949- 54

II. HANDLEBAR HEAD LAMP SWITCH - Black wire with red tracer through caMe "D" to terminal (21); red wire with yellow tracer through cable "D" to terminal (22); red wire with black traccr thrown cable "D" to terminal (9).

19. HORN SWITCH - Black wire to terminal (2S).

20. TERMINAL - Yellow wire thrm«b caM» "C" to switch terminal (3). Used only with parkl* lamp*.

21. TERMINAL - Black wtre with red tracer thro^h cable "D" to bead lamp switch (II); Mack wire through loom H" to head lamp (31).

22. TERMINAL - Red wire with yellow tracer thra«fc caMe "D" to head lamp switch (II); red wire through loom to head lamp (31).

23. TERMINAL • Not used with standard wlrt*. Sot wiring diagram showing speedometer ht^ lock.

24. TERMINAL - Mack wtre tkra«k cablo "C" to )mk-"on terminal 0); red wire through caMe "E" to bora (30).

25. TERMINAL - Green wire thrw*h caM* "E" lo born (30); Mack wire to horn switch.

U. IGNITION CIRCUIT BREAKER - Black wire to coll (35) rear terminal.

27. STOP LAMP SWITCH . Red wire thro»*h cable "F" to terminal (43); Mack wire through caMe "f" to terminal (41).

2«. GENERATOR SIGNAL LIGHT - (marked "GEN") Black wire (under panel base) to junction terminal (6); green wire (under panel base) to junction terminal (44)

2». OIL PRESSURE SIGNAL LIGHT • (marked OIL ) Black wire (under panel base) to junction terminal (6); green wire (under panel base) lo junction terminal (T).

30. HORN - Red wire through caMe "E" lo terminal (24); green wire through cable "E" to terminal (25).

31. MEAD LAMP - Red wire through loom ' H" lo terminal (22); black wtre throt«h loom ' H" to terminal (21).

32. GENERATOR -SWITCH*- TERMINAL • Green wire through caMe "B" to switch terminal (2).

33. GENERATOR - RELAY" TERMINAL • Green wire through cable •■»•• to relay (13).

34. IGNmOM-UGKT SWITCH - (top view) »witch position tor off. Ignition only. Ignition and running lights and partflSg ISEIro shown to Figure 1.' Swilch can be locked u on and park positions only, using head lock key.

M. TERMINAL PLATE - Mounted on fork.

a frame behind ignition

31. TERMINAL - Upper left terminal of terminal bos. Red wire through caMe "A" to switch terminal (l); red wire through loom "G" to battery positive terminal (15).

40. TERMINAL • Upper rich! terminal of terminal box. Green wire through cable "A" to switch terminal (4); green wire through loom * G" to tail and slop lamp (14).

41. TERMINAL - Center left terminal of terminal box. Black wire through caMe A " lo junction terminal (I); black wire through caMe F" lo stop lamp switch (27); black wire to (ront coil terminal.

42. TERMINAL - Lower right terminal of terminal hm. Yellow wire through cable "A" to junction terminal (7); green wire through cable F" to oil pressure signal switch (IT).

43. TERMINAL - Lower left terminal of terminal bo«. Red wire through loom G" and "J" to tail and stop tamp (14); red wire through caMe "F" to stop lamp switch (27).

44. JUNCTION TERMINAL - Green wire (under panel base) to generator signal light (21); black wire through cable "B" lo relay (13).

NOTE - Side-car tail and slop lamps. In sidecar or package truck service, il the side-car or package (ruck is equipped with a tall and stop lamp, the green wtre of Ihe lamp cable is connected to terminal No. 40 and red wire lo terminal No. 43 on terminal bos (39 behind ignition coil.

Green wire through

0 0

Post a comment