Assembling Rear Shock Absorber

Rear shock absorber assembly is essentially the reverse of disassembly.

Apply a thin coat of grease to all surfaces of both cams. Note that cams (12) are identical and be sure to position cam lobes correctly as shown in Figure 2-54 inset. Place assembly in compressor tool and compress spring enough to install key ha Ives (6). Release spring compression. Keys will lock into place in inside diameter of covers 7 or 7A.

Figure 2-55. Disassembling Shock Absorber

Figure 2-54. Rear Shock Absorber - Exploded View

Figure 2-55. Disassembling Shock Absorber

0 0

Post a comment