20 spoke holes are equally spaced around each side flange of hub. 20 spoke holes are arranged in pairs on each side of rim well. Holes are spaced the same on each side of both rim and hub.

Note that there are two types of spokes, long and short at bent end as shown in the figure. One long and one short spoke are used in each pair. The long spoke (L) of each pair on rim crosses over to opposite side of hub while the short spoke (S) of each pair on rim connects to same side of hub. Spoke arrangement is shown in Figures 2-20 and 2-21.

ASSEMBLING SPOKES (Figures 2-20 and 2-21)

1. Place hub on bench with one of the flanges up.

2. Insert 10 short spokes in every other hole from outside ol flange.

3. Insert 10 long spokes in remaining holes.

4. Turn hub over on bench.

Figure 2-21. Wheel Lacing - 19 Inch Wheel (1973 and Later)

Figure 2-19. Spoking Wheel - 16 Inch Wheel



0 0

Post a comment