Info

Figure 5-12. Pulling Alternator Rotor

Probe Connections

Reading

Replace Stator

White to white

0.3 to 1.0 ohms

0 indicates short circuit

White to blue White to blue

Both readings the same

Blue to red

1.5 to 2.0 ohms

Any pin to module base (GND)

100K ohms min.

Any reading indicates short circuit

Probe Connections

Volts @ 2000 rpm

White to white

50 to 100 volts

Blue to red

75 to 125 volts

Module should be replaced if above readings are not obtained.

4. Stator: If output in check No. 2 is satisfactory and module passes tests in check No. 3, check stator at male connector with ohmmeter as follows:

0 0

Post a comment