Connecting the fuel lines to the wrong outlet port can result in a reverse flow of gasoline upon start up. Inadequate safety precautions could result in death or injury.

7. Attach the pressure (3) and the return (4) fuel lines to the fuel rail.

Gasoline is extremely flammable and highly explosive.

When servicing the fuel system, do not smoke or allow open flame or sparks in the vicinity. Inadequate safety precautions could result in death or serious injury.

12. Replace the filler boot and fuel the motorcycle as required. Replace the fuel cap.

13. Install airbox. See 1.4 AIRBOX AND AIR FILTER.

14. Connect negative battery cable.

15. Install airbox cover by positioning the airbox cover with the locating pins in the holes on the frame tabs. Turn bail-head fastener 1/4 turn clockwise.

16. Close and latch seat.

17. Replace the maxi-fuse and the side cover.

18. Check fuel system pressure. See 9.10 FUEL PRESSURE TEST.

8. Press on the vapor vent hose while supporting the mating port with the opposite hand.

9. Install mudflap and stud plate. See 2.36 REAR FENDER/SUPPORTS.

10. Install rear fork. See 2.33 REAR FORK.

11. Install the rear wheel assembly and adjust the drive belt tension. See 2.23 REAR WHEEL.

Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook

Post a comment