Awarning

The piston in the secondary clutch actuator is under pressure. Squeezing the clutch hand lever could push the piston out of its housing with sufficient force to cause death or serious injury.

3. See Figure 2-37. Inspect o-ring (2). Replace if necessary and re-install actuator.

IMPORTANT NOTE

Dispose of clutch fluid in accordance with local regulations.

4. See Figure 2-36. If condition indicates replacement of secondary actuator:

a. Place a suitable container under secondary clutch actuator (4). Loosen flare nut (5) and allow clutch fluid to drain from clutch line (1).

b. Remove flare nut and remove actuator.

c. Remove bleeder screw and drain remaining clutch fluid.

Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook


Post a comment