Awarning

Do not allow brake fluid, bearing grease, lubricants, etc. to contact brake rotor or reduced braking ability will occur which could result in death or serious injury.

7. Install the brake caliper to the fork legs.

a. Loosely install long mounting bolt into top hole on fork leg.

b. Install short mounting bolt into bottom hole on fork leg. Tighten bottom mounting bolt to 38-52 Nm (28-38 ft-lbs).

c. Final tighten top mounting bolt to 38-52 Nm (28-38 ft-lbs).

8. Repeat steps 6-7 to install brake caliper on other side of wheel.

1. Fork slider

2. Axle holder pinch bolt

3. Axle holder

4. Drill bit, screwdriver or steel rod

5. Axle

1. Fork slider

2. Axle holder pinch bolt

3. Axle holder

4. Drill bit, screwdriver or steel rod

5. Axle

Figure 2-67. Aligning Fork to Wheel

Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook


Post a comment