Awarning

Read the operating manual for the manufacturer and model of tire machine used. Failure to follow operational procedures or to heed any cautions/warnings in the manual for the brand/model of tire machine could result in death or serious injury.

3. With rim installed in pneumatic tire machine jaws, orient tire with rotational arrow pointing in direction of forward rotation. Push one side off bottom bead into rim well and walk the bottom bead around until it is completely in the rim well.

NOTE

The tire has a colored dot on sidewall, it is a balance mark and should be located next to valve stem hole.

4. Position yellow dot at valve stem and starting 180 degrees opposite valve stem, mount top bead to shoe of pneumatic tire machine.

5. Rotate wheel to pull bead into rim well. Remove wheel from tire machine.

Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook


Post a comment