Awarning

Check for proper turn signal and tail lamp operation before riding motorcycle. Visibility is a major concern for motorcyclists. Failure to have proper lamp operation could result in death or serious injury.

20. Verify turn signal lamp operation.

1. Fender to inner fender bolts

2. TSSM module

3. Fender

4. TSSM bracket lock nuts

5. Grabstrap

1. Fender to inner fender bolts

2. TSSM module

3. Fender

4. TSSM bracket lock nuts

5. Grabstrap

Figure 2-108. Rear Fender Components (under pillion)

Figure 2-108. Rear Fender Components (under pillion)

1. Inner fender

2. Inner fender bolts

3. Rear turn signal and license bracket bolts

1. Inner fender

2. Inner fender bolts

3. Rear turn signal and license bracket bolts

Figure 2-109. Inner Fender and Rear Turn Signal and License Plate Bracket

1. Install mudflap and stud plate to frame fender weldment. Tighten to 8-12 Nm (70.8-106.2 in-lbs).

2. See Figure 2-110. Loosely install both fender support brackets (2). Finger tighten fasteners (1).

3. Insert upper shock mounting nut (3) through support bracket and into frame side rails.

4. Lower motorcycle on rear tire to align rear shock mounting eye with mounting nuts. Install rear shock mounting bolt and spacers. See 2.32 REAR SHOCK ABSORBERS.

5. Tighten fasteners:

a. Rear shock mounting bolts - 41-68 Nm (30-50 ft-lbs).

b. Fender support bracket fasteners - 34-41 Nm (25-30 ft-lbs).

6. Install inner fender. Tighten fasteners to 20-26 Nm (15-19 ft-lbs).

7. Route wiring harness for tail/stop lamp, license plate lamp, and turn signals. Install turn signal and license plate bracket assembly. Tighten to 8-12 Nm (71-106 in-lbs).

8. Connect:

b. License plate lamp connector [45].

c. Tail/stop lamp connector [93],

1. Mounting bolt

2. Fender support bracket

3. Upper shock mounting nut

4. Inner fender mounting stud

1. Mounting bolt

2. Fender support bracket

3. Upper shock mounting nut

4. Inner fender mounting stud

Figure 2-110. Right Side Fender Support Bracket

Figure 2-110. Right Side Fender Support Bracket

1. Inner fender mounting stud

2. Lower shock mounting nut

3. Fender support bracket

4. Mounting bolt

1. Inner fender mounting stud

2. Lower shock mounting nut

3. Fender support bracket

4. Mounting bolt

Figure 2-111. Left Side Fender Support Bracket

Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook


Post a comment