Awarning

To protect against shock and accidental start-up of vehicle, disconnect the negative battery cable before proceeding. Inadequate safety precautions could result in death or serious injury.

4. Disconnect negative battery cable.

5. See Figure 2-4. Loosen and remove nut (2) and travel limiting washer (1) from center mounting bolt (5).

6. Loosen and remove nuts (3) from engine mount bolts (4) (Left side requires using a 8 mm ball Allen with a 2" extension).

7. By lifting up the center mounting bolt (5) slightly, the engine mount pivots down and out away from the fan shroud.

8. Install new motor mount and left and right engine mounting bolts (4).

9. Install travel limiting washer (1) and center mounting bolt nut (2).

10. Tighten all fasteners to 34-41 Nm (25-30 ft-lbs).

11. Connect negative battery cable. Tighten to 6.8-10.8 Nm (60-96 in-lbs).

12. Replace airbox cover.

Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook


Post a comment