Bulb Replacement

1. Locate notch on edge of front or rear turn signal lens cap.

2. Insert coin in notch. Carefully twist coin until lens pops out of turn signal housing.

3. Replace bulb.

a. Push bulb in and turn counterclockwise.

b. Pull bulb from socket when tab on bulb clears opening on socket.

c. Push new light bulb in and turn clockwise to lock in place.

4. Snap lens back into turn signal housing with the notch facing down.

NOTE

If after replacing a bulb, the turn signal or running lamp will not light, check the wiring, the ground at the socket and/or the switch.

Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook


Post a comment