Caution

To avoid leakage, verify that the washers, banjo bolt, brake line and caliper bore are completely clean.

2. Lubricate new steel/rubber washers (2) with D.O.T. 5 SILICONE BRAKE FLUID. Connect the brake line (3) to caliper using two new steel/rubber washers (2) and banjo bolt (1). Tighten to 23-31 Nm (17-23 ft-lbs).

3. Repeat for opposite side caliper.

AcAUTION

Direct contact of D.O.T. 5 SILICONE BRAKE FLUID with eyes may cause eye irritation, swelling, and redness. Avoid eye contact. In case of eye contact flush with large amounts of water and get medical attention. Swallowing large amounts of D.O.T. 5 SILICONE BRAKE FLUID may cause digestive discomfort. If swallowed, obtain medical attention. Use in well ventilated area. KEEP OUT OF REACH OF CHILDREN.

4. Remove cover from front brake master cylinder. Fill master cylinder with D.O.T. 5 SILICONE BRAKE FLUID. Verify that fluid level is at FILL LEVEL when the motorcycle is level.

5. Tighten cover screws to 0.7-0.9 Nm (6-8 in-lbs).

Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook


Post a comment