Disassembly

ASSEMBLY

NOTE

See 2.26 TIRES to service tire or valve stem assembly.

1. Remove spacers from left and right sides.

2. If tire replacement is necessary, remove tire and valve stem. See 2.26 TIRES.

3. If wheel bearing replacement is necessary, remove the sleeve and press out the sealed wheel bearings. See 2.24 SEALED WHEEL BEARINGS.

4. If it is necessary to remove brake discs and if wheel is to be assembled with same discs, mark both wheel and discs, so they can be installed in their original locations.

5. See Figure 2-64. If removing brake discs (5), remove five bolts (2) and spring washers (3) securing brake disc to the wheel (1). Repeat procedure to remove disc on opposite side of wheel. Discard bolts and spring washers.

Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook


Post a comment