Brake caliper piston remover

1. See Figure 2-43. Remove pad pins (10), brake pads (7) and bridge bolts (11) to separate caliper housings (1, 8).

2. Remove anti-rattle spring (6). If necessary, remove bleeder valve (12).

3. See Figure 2-45. Remove pistons.

a. Place BRAKE CALIPER PISTON REMOVER (Part No. HD-43293) between caliper housings.

b. Insert two bridge bolts (2) and tighten securely.

c. If the bleeder valve was removed, loosely reinstall or place a gloved finger over the bleeder valve hole on the outside caliper housing.

Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook

Post a comment