Fuel Tubes

1. See Figure 9-17. Install washers (3) over fuel tube.

2. Apply clean engine oil to new fuel tube o-rings (2).

3. Install feed and return fuel tubes into proper holes in fuel rail.

4. See Figure 9-16. Install fuel pressure regulator clip over fuel tubes.

5. Install screws (5, 9). Tighten to 2.0-2.8 Nm (18.0-25.0 in-lbs).

1. Fuel rail

3. Washer

4. Feed fuel tube

5. Return fuel tube

Figure 9-17. Fuel Tubes

Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook


Post a comment