Inspection and Lubrication

1. See Figure 1-52. Turn the cable adjusters (2, 4) and jam-nuts (3) as short as they will go.

2. Remove two screws (1) to separate the upper handlebar housing from the lower housing.

3. Use a screwdriver to rotate each ferrule and remove cable from the throttle grip.

4. Slide the throttle grip off the handlebar.

5. Apply a light coat of graphite to the handlebar and replace throttle grip.

6. Put one or two drops of SUPER OIL (Part No. HD-94968-85TV) into the housing of each cable.

7. Assembling the handlebar housing and tighten both screws (1) to 4.0-5.1 Nm (35-45 in-lbs).

Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook

Post a comment