Harley V Rod Bearing Race Tool




Steering head bearing race installer

1. Lubricate outside of new steering head bearing races with lubricant provided or engine oil.

2. See Figure 2-97. Assemble STEERING HEAD BEARING RACE INSTALLER (HD-39302) and bearing races on tool's draw down bolt through steering head. Orient races so lettered edges are at bottom of steering head bore in steering head.

3. Continue to thread nut on draw down bolt until races fit, and are parallel to steering head bore.

4. Slowly tighten nut while stopping periodically to check for bearing race to steering head parallelism.

Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook

Post a comment