1. See Figure 5-8. Install replacement solenoid on frame studs.

2. Thread on the two hex-nuts and tighten to 6-10 Nm (53-88 in-lbs).

3. Seat radiator and thread in and torque the two bottom radiator bolts to 23 Nm (17 ft-lbs).

4. See Figure 5-7. Install negative battery cable (2) and solenoid cable (4) on the solenoid posts. Thread on and torque the hex-nuts to 6-10 Nm (53- 88 in-lbs).

6. Push in the black wire lead (3) on the outside and the green wire lead (5) on the inside.

Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook

Post a comment