Installation

To replace, press a new pressure side filter into its bracket up against the bracket stop, replace the fuel crossover hose and the pressure fuel line, and install a new clamp over the crossover hose using side of HOSE CLAMP PLIERS (HD-41137).

2. Quad-seal

3. Rheostatic slide and fuel level sender float

4. Crossover tube

5. Rubber spacer/bumper

Figure 4-6. Fuel Pump/Filters/Fuel Level Sender Assembly

Some gasoline will drain from the individual components when disconnected from the fuel pump/filters/fuel level sender assembly. Thoroughly wipe up any spilled fuel immediately. Dispose of rags in a suitable manner. Gasoline is extremely flammable and highly explosive. Inadequate safety precautions could result in death or serious injury.

See Figure 4-5. The suction side filter (4) filters the fuel as it enters the strained intake of the fuel pump. The suction side filter is replaced along with the fuel pump at the service interval of 161,000 kilometers (100,000 miles).

Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook


Post a comment