Pedal Adjustment

If adjustment is needed:

1. See Figure 1-27. With a wrench holding the push rod (1), loosen jam nut (2).

2. Turn push rod (1) to set threaded rod end (3) length (5) to 18-22 mm (0.690-0.890 in.).

NOTE

Measure pedal adjustment from the centerline of the clevis pin (4) to the backside of the jam nut (2).

3. With a wrench holding the push rod (1), tighten jam nut (2).

1. Push rod

2. Jam nut

3. Rod end

4. Clevis pin

1. Push rod

2. Jam nut

3. Rod end

4. Clevis pin

Figure 1-27. Rear Brake Pedal

Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook


Post a comment