Relayfuse Block Installation

1. See Figure 8-1. Slide each relay/fuse block assembly back into relay/fuse block cover. Push relay/fuse block assembly into the cover until cover release tab locks into place.

2. Replace airbox cover. See 1.4 AIRBOX AND AIR FILTER.

3. Turn ignition switch to the FUEL position and close seat. Then turn ignition switch to the LOCK position.


When closing the seat, make sure the ignition switch is in the FUEL position. If the ignition switch is in any other position when the seat is closed, the seat latch mechanism could be damaged.

4. Replace maxi-fuse. See 8.5 MAXI-FUSE.

5. Test the vehicle system that is controlled by the relay or fuse that was replaced.

Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook

Post a comment