Removal

1. Remove airbox and air filter. See 1.4 AIRBOX AND AIR FILTER.

caution

If airbox is not to be reinstalled immediately, cover throttle body intakes with tape to prevent contaminates/ objects from falling down the throttle bores. Do not use shop rags or objects that could damage the throttle body butterflies.

2. See Figure 9-4. Cover air intakes (3) to prevent debris from entering cylinders.

awarning

To protect against shock and accidental start-up of vehicle, disconnect the negative battery cable before proceeding. Inadequate safety precautions could result in death or serious injury.

3. Disconnect negative battery cable.

4. Unplug TP sensor connector [88B] (2) by pulling external latch outward and using rocking motion to remove.

5. Remove two screws to detach TP sensor (1) from throttle body. Discard screws.

Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook


Post a comment