1. Unlock and open seat.

2. See Figure 2-105. Remove seat tether (2) from the hole in frame.

3. Pry hinge clip (1) from seat hinge pins. Slide seat rearward to release hinge pins from bushings on frame.

4. See Figure 2-106. Remove pillion mounting bolt and washer (5). Save bolt and washer for reinstallation. Slide grabstrap (2) forward off pillion.

5. Push pillion forward to release slot on the bottom of pillion from tongue on fender. Lift pillion back and away from motorcycle.

6. If necessary, remove grabstrap.

Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook

Post a comment