Removal

1. With motorcycle in neutral, remove fastener from shift linkage to foot shift lever.

2. See Figure 2-27. Remove retaining ring (1) from clevis pin (4) holding left side footrest (3) to footrest axle (7). Remove clevis, footrest, and spring washer (5).

NOTE

Shift lever toe peg unthreads from shift lever. Remove and replace as required.

3. Remove retaining bolt (9) holding left side footrest axle

(7) to frame. Remove footrest axle (7) and foot shift lever

4. Remove left side radiator cover.

5. Remove the cotter key from the clevis pin connecting brake pedal (10) to master cylinder brake rod.

6. Cover outside face of clevis pin with cardboard and using a large pliers, squeeze pin until pin shoulder pops out of interference fit in the clevis. Remove clevis pin and brake rod.

7. Remove retaining ring (1) from clevis pin (4) holding right side footrest (3) to footrest axle (7). Remove clevis, footrest, and spring washer.

8. Remove retaining bolt (9) holding right side footrest axle (7) to frame. Pull footrest axle (7) from frame and rear brake pedal (10).

Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook


Post a comment