Removaldisassembly

1. See Figure 2-28. Loosen cable adjuster jam nuts (1). Screw throttle cable adjuster until it is a short as possible.

2. Remove screws that hold handlebar housing together to separate the upper and lower housings.

3. Use a screwdriver to rotate cable ferrules in throttle grip notches. Remove cables from notches on inboard side of throttle grip and remove cables from throttle grip and lower housing.

4. Remove airbox. See 1.4 AIRBOX AND AIR FILTER.

5. Remove throttle cable housings from guides at throttle body and remove cable barrels from throttle cam.

6. See Figure 2-29. Pull cables from housing by placing a drop of oil on retaining ring that holds cable in housing, then firmly pull bent tubing portion of cable out of housing using a rocking motion.

Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook


Post a comment