1. See Figure 3-234. Remove three fasteners and remove oil filter mount.

2. See Figure 3-235. Remove o-ring and discard.

3. Inspect oil passages for debris and dirt. Clean as required.

4. Install new o-ring and install oil filter mount.


Always replace o-ring when oil filter mount has been removed and/or replaced.

5. Tighten oil filter mount fasteners to 9.7 Nm (85 in-lbs).

Figure 3-235. Replace O-Ring
Figure 3-234. Remove Oil Filter Mount Fasteners
Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook

Post a comment