Starts Hard

1. Spark plugs in bad condition or have improper gap or are partially fouled.

2. Battery nearly discharged.

3. Loose wire connection at one of the battery terminals, coil, or plug between ECM or ignition module.

4. Water or dirt in fuel system.

5. Intake air leak.

6. Fuel tank vent hose and vapor valve plugged, or fuel line closed off, restricting fuel flow.

7. Engine lubricant too heavy (winter operation).

NOTE

For cold weather starts, always disengage clutch.

8. Ignition not functioning properly (possible sensor failure).

9. Faulty ignition coil.

10. Valves sticking or valves too tight.

11. Rotor key sheared.

DIY Battery Repair

DIY Battery Repair

You can now recondition your old batteries at home and bring them back to 100 percent of their working condition. This guide will enable you to revive All NiCd batteries regardless of brand and battery volt. It will give you the required information on how to re-energize and revive your NiCd batteries through the RVD process, charging method and charging guidelines.

Get My Free Ebook


Post a comment