Warning

1. Position the fuel tank in the frame and position the fuel tank mounting bracket to the frame.

2. Washer

3. Upper slot end

4. Lower slot end

2. Washer

3. Upper slot end

4. Lower slot end

Figure 4-7. Fuel Tank Mounting Bracket

2. See Figure 4-7. Loosely thread in the two mounting bolts (1) and washers (2) through the forward lower slot ends (4) of the bracket into the threaded boss on the frame.

3. Evenly press forward and downward on the bracket against the fuel tank until the mounting bolts slide back and up into the upper slot ends (3).

4. Tighten the mounting bolts to 61-75 Nm (45-55 ft-lbs).

5. Connect the fuel module connector while supporting the top plate connector half with the opposite hand.

6. See Figure 4-3. Install the smaller return fuel line (4) and the larger pressure fuel line (3) while supporting the mating port. Press the lines on until the click is heard that indicates engagement.

Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook


Post a comment