After installing and locking seat, pull upward on the latch side of the seat to be sure it is locked in position. If seat is loose, it could shift position during vehicle operation resulting in loss of control of the vehicle and death or serious injury.

52. Replace maxi-fuse and right side cover.

53. Test ride motorcycle and adjust as required.


Always connect the positive battery cable first. If the positive cable should contact ground with the negative cable installed, the resulting sparks may cause a battery explosion that could result in death or serious injury.

48. Connect positive battery cable to battery and then connect negative battery cable to battery. Tighten to 6.8-10.8 Nm (60-96 in-lbs).

49. With the spark plugs removed, use the starter to turn the engine over to prime the engine with oil. The engine oil pressure indicator lamp should illuminate. See 3.5 OIL PRESSURE.

Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook

Post a comment