Illus

WIRING DIAGRAM FOR WLA MODEL MOTORCYCLES WITH U. S. A. REGISTRATION NUMBERS 618.025 AND HIGHER. NOTE THAT THIS WIRING HARNESS HAS THREE-WIRE CABLE FROM SWITCH TO SERVltE HEADLAMP. BLACKOUT HEADLAMP AND HORN. socket of right lamp. Left, bottom lamp is spare blackout tail lamp. Plug can be inserted in bottom socket of either lamp for blackout tail lamp). 23. SERVICE TAIL AND STOP LAMP (Top socket in left tail lamp two wires in one plug) Tail lamp cable black wire from switch terminal 2 is for...

Overhauling Transmission And Clutch

Lower rear end of bottom skid plate. In some cases it will be found necessary to remove only the two rear mounting bolts in other cases a U-clamp holding skid plate to front frame tube will have to be removed. B. Remove left footboard, sidebar and clutch pedal assembly in one unit. Release cable must first be disconnected from clutch footpedal by removing cotter pin and washer. C. Remove oil bath air cleaner and mounting plate this requires loosening hose clamp at carburetor hose connection...