Coat the master piston and primary and secondary cups with clean brake fluid, then msmli the check valve, spring, primary cop, secondary cup and piston into the master cylinder. Install the snap ring and piston boot.


■ Do not allow the lips of the cups to turn inside out and he certain the snap ring is firmly seated in the groove.

Install the brake light switch. TORQUE: 1.2 N»m »0.12 kg-m, 0.9 ft-lb)

Install the brake lever and rear view mirror. TORQUE: Pivot bolt: 1 N-m <0.1 kg-m, 0.7 ft-lb) Pivot nut: 6 N-m {Q.6 kg-m, 4.3 ft-lb)

0 0

Post a comment