California model

MOTE

• The EVAP purge control valve should be inspected if hot restart ¡s difficult.

Chock ail fuel tank, EVAP Purge Control Valve, and EVAP canister hoses to be sure they are not kinked and are securely connected. Replace any hose that shows signs of damage or deterioration

NOTE

• The EVAP purge control valve is located behind the radiator.

Disconnect, the EVAP purge control valve hoses from their connections and remove the E'v'AP purge control valve from Its mount ■ Refer to the routing label on the inside of the left side cover tor hose connections.

Connect a vacuum pump to the 8 mm {0.31 in.) i.D. hose that goes to the 3-way joint. Apply the specified vacuum to the EVAP purge controi valve.

SPECIFIED VACUUM: 250 mm (9.8in) Hg

4-15

INFORMATION UPDATE bABEb

vehicle emission controi information update

this vehicle has been adjusted to (.a ? improve emission control performance when operated at hi6h altitude. —"

altitude performance adjustment instructions are available at your authorized honda dealer

After '93:

The specified vacuum should be maintained. Replace the tdv'AP purge control valve if vacuum is not maintained

Vacuum/Pressure pump Vacuum pump

Remove the vacuum pump and connect it to the vacuum hose thai goes to the left carburetor body.

Apply rime specified vacuum to the EVAP purge control valve.

SPECIFIED VACUUM: 250 mm (9.8 in) Hg

'The specified vacuum should be maintained.

Replace die EVAP purge •mntroi valve if vacuum is not main-

TOOL:

Vacuum;Pressure pump Vacuum pump

CAIJTÏO

A937X-041 XXXXX or

np to the 8 mm (0.31 in.) hO. hose that anister. White applying the specified arena control valve hose that goes to tire rough the canister hose. Air should flow ; control valve and out the horse thai; goes

¡e control valve if air does not flow out.

iamays' to lin? purge control valve, do riot use high sources. Use a hand operated air pump ends.

TOOL:

V acuum/Pressure pump Vacuum pump Pressure pump

AS37X 041 - XXXXX or

ST-AH-260-WIC7

Remove the pumps., install the EVAP purge control valve on its mount, route, and reconnect the hoses according to the routing fade!

0 0

Post a comment