Transmission Assembly

Mainshaft

Check the gears for freedom of movement or rotation on the shaft,

Check that the snap rings are seated in the grooves and align their end gaps with the lands of the splines.

Note the installation direction of each snap ring or washer.

Aiign the oil holes in the M3 and M4 gear bushings with the oil holes in the mainshaft.

if) GEAR BUSHING

if) GEAR BUSHING

MAINSHAFT

MAINSHAFT

M1 GEAR {16T)

M4 GEAR (30TI

Countershaft

Check the gears for freedom of movement or rotation on the shaft.

Check that the snap rings are seated in the grooves and align their end gaps with the lands of the splines. Note the installation direction of each snap ring or washer. Align the oil holes tn the CI, C2 and C4 gear bushings with the oii holes in the countershaft.

(2) OIL. HOLES

11-16

0 0

Post a comment