Front Caliper Removal

•Loosen the banjo bolt [A] at the brake hose lower end, and tighten it loosely.

• Unscrew the caliper mounting bolts [B], and detach the caliper [C] from the disc.


Do not loosen the caliper assembly bolts [D]. Take out only the caliper mounting bolts for caliper removal. Loosening the caliper assembly bolts will cause brake fluid leakage.

• Unscrew the banjo bolt and remove the brake hose [E] from the caliper (see Brake Hose Removal/Installation).


Immediately wash away any brake fluid that spills.

0 0

Post a comment