Specifications

Item

Standard

Front Fork (per one unit):

Fork inner tube diameter

<D 41 mm

Fork spring preload setting

Adjuster protrusion is 15 mm (6 Marks)

(Usable Range: 5-20 mm)

Air Pressure

Atmospheric pressure (Non-adjustable)

Rebound damper setting

6th click from the first click of the fully clockwise position

(Usable Range: 1 «—>12-13 clicks)

Compression damper setting

5th click from the first click of the fully clockwise position

(Usable Range: 1 «—► 7 ~ 9 clicks)

Fork oil viscosity

KAYABA01 (SAE5W)

Fork oil capacity

463 ± 4 mL (completely dry).

ZX900-B3 other than US, CN, 457 ± 4 mL (completely dry)

approx. 395 mL (when changing oil).

390 mL ZX900-B3 other than US, CN (when changing oil)

Fork oil level

Fully compressed, without fork spring, below from

outer tube top 86 ± 2 mm.

ZX900-B3 other than US, CN 90 ± 2 mm

Fork spring free length

304.6 mm (Service limit 300 mm).

ZX900-B3 other than US, CN 387.4 mm

(Service limit 380 mm)

Rear Shock Absorber:

Rebound damper set

No. 2 of 4 positions

Compression damper set

10th click (12th click, ZX900-B3 other than US, CN)

from the first click of the fully clockwise position

(Usable Range: 1 «—► 16-22 clicks)

Spring setting position

Standard

Spring free length minus 12 mm

Usable range

Spring free length minus 12 mm to 22 mm

(weaker to stronger)

ZX900-B3 other than US, CN

Standard

Spring length 212 mm

Usable range

Spring length 212 mm to 206 mm (weaker to stronger)

Spring Free Length

(ZX900-B3 other than US, CN)

Standard

226 mm

Gas pressure

980 kPa (10 kg/cm2, 142 psi, Non-adjustable)

Special Tools - Fork Spring Compressor 57001-1338 Fork Spring Stopper: 57001-1374 Fork Piston Rod Puller, M10 x 1.0: 57001-1298 Forte OH Level Gauge: 57001-1290 Fork Outer Tube Weight 57001-1218 Fork Cylinder Holder: 57001-1297 Forte Oil Seal Driver, <D41: 57001-1288 Steering Stem Nut Wrenches: 57001-1100 (2) Socket Wrench: 57001-1370 Oil Seal & Bearing Remover: 57001-1058 Bearing Driver Set 57001-1129 Inside Clrcllp Pliers: 57001-143 Jack: 57001-1238

Special Tools - Fork Spring Compressor 57001-1338 Fork Spring Stopper: 57001-1374 Fork Piston Rod Puller, M10 x 1.0: 57001-1298 Forte OH Level Gauge: 57001-1290 Fork Outer Tube Weight 57001-1218 Fork Cylinder Holder: 57001-1297 Forte Oil Seal Driver, <D41: 57001-1288 Steering Stem Nut Wrenches: 57001-1100 (2) Socket Wrench: 57001-1370 Oil Seal & Bearing Remover: 57001-1058 Bearing Driver Set 57001-1129 Inside Clrcllp Pliers: 57001-143 Jack: 57001-1238

0 0

Post a comment