95991-69 Fork Holding Tool

Part No. 94630-67 Wheel Hub Bearing Locknut Wrench

Used to remove fork piston rod retainer from fork tube.

Part No. 94694-52 Fork Piston Rod Retainer Wrench

For small wheel spoke nipples (.205" across flats).

For small wheel spoke nipples (.205" across flats).

Part No. 94678-18 Spoke Nipple Wrench

Used to adjust rear shock absorber units for more or less spring compression (1974 and earlier).

Part No. 94700-65 Rear Shock Spanner Wrench (1974 and Earlier)

For large wheel spoke nipples (.234" across flats).

Part No. 94681-39 Spoke Nipple Wrench

\V

Used to adjust rear shock

ab-

sorber units for more or

less

N

^^ spring compression (1975

and

L

later)

Part No. 94820-75 Rear Shock Spanner Wrench (1975 and Later)

x

Used to remove fork piston rod

bushing from fork damper tube.

Hj^

Part No. 94691-52 Fork Piston Rod Bushing Spanner Wrench

Used to install press-fit connecting link sideplate supplied with replacement chains.

Part No. 95020-66 Rear Chain Connecting Link Press Tool

Removes press fit roller pins from

all chains.

Ivryp

i s

Part No. 95021-29 Chain Diassembly Tool

Part No. 95021-29 Chain Diassembly Tool

Used to rivet rear sprocket to brake shell. Set consists of riveting block, rivet punch, rivet set, adapter and support flange.

Part No. 95600-33B Sprocket Riveting Set

When inserted into top end of fork tube, blade enters slot of damper tube to keep it from turning while removing or installing bottom nut on fork.

Part No. 95500-29A Wheel Truing Stand

Part No. 95991-69 Fork Damper Holding Tool, 1968 to 1972

/cK

When inserted into top end of

. fork tube, socket fits over flats on

|i damper tube to keep it from turn-

y ing while removing or installing

bottom screw on fork.

Special pliers for removing and replacing retaining rings.

96215-49 Small.

96216-49 Large.

Special pliers for removing and replacing retaining rings.

96215-49 Small.

96216-49 Large.

Part No. 94556-73 Fork Damper Holding Tool (1973-1974)

Internal Lock Ring Pliers

Adjustable stand for truing spoked wheels. Includes arbor.

95515-30A Arbor for wheels. (Can be used to convert old stand 95500-29.)

Three recommended for use to support fork tubes while straightening on an arbor press.

Part No. 96247-54 Fork Tube Straightening Block (1972 & Earlier)

Used for straightening handle

bar, forks and frames. Hooks on

tubes for applying bending lever

age.

Part No. 96806-40 Bending Bar

Part No. 96806-40 Bending Bar

Complete set of tools consists of Fork Slider Bushing Puller (1), Bushing Driver (2) and Bushing Reamer (3) with long and short pilots. Tools used to remove worn fork slider bushings, install new parts and ream to size.

Part No. 96254-54 Bushing Tools for Front Fork (1972 and Earlier)

Part No. 97010-52A Shock Absorber Tool

Simplifies shock absorber disassembly or assembly. Holds spring in compression while disassembling parts. -52A - Block

ENGINE

0 0

Post a comment