Tire Tread Runout

Figure 2C-20B. Checking Tire Radial Runout

Tire tread runout should be no more than 3/32". If tire tread runout is more than 3/32", remove tire from rim and check rim bead runout to see if rim is at fault (see "Truing Wheel").

If rim bead runout is less than 1/32", tire is at fault and should be replaced. If rim bead runout is more than 1/32" correct by tightening selected spoke nipples as outlined previously, then reinstall tire and re check tire tread runout.

0 0

Post a comment