Adjusting The Engine Idling Speed Note

Prior to adjusting the engine idling speed, the carburetor synchronization should be adjusted properly, the air filter should be clean, and the engine should have adequate compression. 1. Start the engine and let it warm up for several minutes. engine tachometer (to the spark plug lead of cyl. 1) 3. Measure engine idling speed Out of specification Adjust. Engine idling speed 1,050 - 1,150 r min a. Turn the pilot screw in or out until it is lightly seated. b. Turn the pilot screw out the...

Special Tools

90890 01447

The following special tools are necessary for complete and accurate tune-up and assembly. Use only the appropriate special tools as this will help prevent damage caused by the use of inappropriate tools or improvised techniques. Special tools, part numbers or both may differ depending on the country. When placing an order, refer to the list provided below to avoid any mistakes. This tool is used to remove the generator rotor. This tool is used to hold the generator rotor when removing or...