Warning

• Never disassemble brake components unless absolutely necessary.

• If any connection on the hydraulic brake system is disconnected, the entire brake system must be disassembled, drained, cleaned, properly filled, and bled after reassembly.

• Never use solvents on internal brake components.

• Use only clean or new brake fluid for cleaning brake components.

• Brake fluid may damage painted surfaces and plastic parts. Therefore, always clean up any spilt brake fluid immediately.

• Avoid brake fluid coming into contact with the eyes as it can cause serious injury.

FIRST AID FOR BRAKE FLUID ENTERING

THE EYES:

• Flush with water for 15 minutes and get immediate medical attention.

EAS00582

REPLACING THE FRONT BRAKE PADS

The following procedure applies to both brake calipers.

NOTE:

When replacing the brake pads, it is not necessary to disconnect the brake hose or disassemble the brake caliper.

1. Remove:

2. Remove:

4. Measure: • brake pad wear limit ® Out of specification ^ Replace the brake pads as a set.

0 0

Post a comment