Caution

This motorcycle has a drive chain with small rubber O-rings (1) between the drive chain side plates. Never use high-pressure water or air, steam, gasoline, certain solvents (e.g., benzine), or a coarse brush to clean the drive chain. High-pressure methods could force dirt or water into the drive chain's internals, and solvents will deteriorate the O-rings. A coarse brush can also damage the O-rings. Therefore, use only kerosene to clean the drive chain. Don't soak drive chain in kerosine more then ten minutes. O-ring is damage by kerosine.

Damage ^ Replace the drive chain.

• drive chain rollers (2) Damage/wear ^ Replace the drive chain.

• drive chain side plates (3) Damage/wear ^ Replace the drive chain. Cracks ^ Replace the drive chain and make sure the battery breather hose is properly routed away from the drive chain and below the swingarm.

5. Lubricate:

Recommended lubricant

Engine oil or chain lubricant suitable for O-ring chains

• drive sprocket

• rear wheel sprocket

More than 1 /4 tooth @ wear ^ Replace the drive chain sprockets as a set. Bent teeth ^ Replace the drive chain sprockets as a set. © Correct ® Drive chain roller (2 Drive chain sprocket

0 0

Post a comment